You are currently viewing How to Plan a Campervan Dinette Bed

How to Plan a Campervan Dinette Bed

A campervan dinette bed turns a dining area into a platform for sleeping. The changeover works best when the table, supports and cushions each have a defined position. Try the conversion with the rest of the van in evening mode, including bedding and anything that normally sits in the aisle.

Take the sleeping measurements at deck height

Measure usable length and width at the platform and again at shoulder height. A taper near the rear doors can make the space feel narrower even when the base measures well. Lay out the actual cushions and check their front edges, seams and thicknesses. Where two cushions meet over a gap, both should have continuous support from the planned deck.

Plan the table’s second job

Some layouts drop the tabletop between the benches. Others move the table aside and use a separate infill. If the top forms part of the bed, confirm its span, thickness and supports are suitable for that job. Keep the table leg or catch stowed so it cannot interfere with the supports. Arrange things so the conversion can happen from one side with the doorway open.

Run the changeover twice

First try the bed with an empty van. Then repeat with bedding, shoes and water bottles in their usual places. Check whether you can still open anything needed overnight and where the seat backs go. Time the process and adjust anything that requires you to step around a loose platform or lift a cushion repeatedly.

FAQ

Can I keep storage under both benches?

Yes, if you leave sufficient access for the items you use routinely. Decide which bay must open while the bed is made.

Do the dining benches count as travel seats?

Travel seating has separate safety and approval requirements. A dinette suitable for camping does not establish its suitability for passengers in motion.

Read our guide to choosing a campervan bed layout for the next part of the build. You can also send your layout and measurements to NEVAN.