An inflatable drive-away awning for a campervan adds covered space that you can leave on the pitch while taking the van out. Its fit hinges on the point where the tunnel meets the van and the gap it leaves for the side door. The quickest useful measurement is the real height of the connection above level ground.
Measure the rail and plan the tunnel
Record the height and usable length of the actual rail, then check the awning maker’s connection options. The Outdoor Revolution measuring guide explains why the vehicle’s published overall height can be misleading. Open the slider fully and check its upper and lower corners around the tunnel. Keep the step and normal door latch reachable from the sheltered side.
Compare the pitched and folded footprints
Draw the van, tunnel and awning on a pitch plan and include guy lines. Put the packed equivalent in your garage or under the bed, along with the pump and pegs. Make sure you can pull the bag out without moving the entire load. A large air awning may be quick to inflate and still awkward to handle when wet.
Practise leaving it on the pitch
Do an initial pitch in good weather, follow the maker’s inflation and weather guidance and practise detaching and reconnecting once. When permitted, mark the wheel positions or another alignment reference so the awning tunnel will reach when you return. Dry the fabric at home if you pack it wet.
FAQ
Is the rail height the same on every van of the same model?
Measure yours. Wheels, suspension, a camper conversion and the mounting method can change the connection height.
Does the awning have to come down when I drive away?
Check the manufacturer’s detachment procedure and the campsite rules. Drive-away designs normally have a way to stand separately.
Read our guide to campervan garage storage for the next part of the build. You can also send your layout and measurements to NEVAN.