You are currently viewing Does Your Campervan Need a Water Accumulator?

Does Your Campervan Need a Water Accumulator?

A campervan water accumulator is a small pressure vessel fitted to some fresh-water systems. It can smooth a pulsing tap by giving the pump a small amount of stored pressure to work with. Blame a dripping joint or an air leak first if a pump keeps cycling with every tap closed.

Check which pump you have

Find the model and read its instructions. A conventional pressure-switch pump may benefit from an accumulator, particularly at a reduced flow. Some electronically controlled pumps have different advice. The Pentair Shurflo 182 manual illustrates how the pump’s switch-on pressure affects the setting for that accumulator. Use the instructions for your own pair of components.

Draw the service space before ordering

Hold the unit’s full dimensions, including connectors, against the proposed compartment. Leave room to reach the air valve, support the fittings and remove the body for service. Mark the route of the hose with the largest drawer shut. Use suitable parts for drinking water and check the supplier’s mounting and pressure limits for the whole assembly.

Compare the tap before and after

Once the system is fitted and checked for leaks, run a tap fully, then repeat at the low flow you use for rinsing. If the pump still starts abruptly or runs with taps closed, inspect the pump and plumbing following their manuals. Include the accumulator in the van’s winter draining and routine service instructions.

FAQ

Is an accumulator a second water storage tank?

It stores a small amount of water under pressure and helps smooth delivery. It has little effect on trip capacity.

Is one factory pressure setting right for every van?

Follow the published instructions for the accumulator and the pump. The required setting depends on how those components operate together.

Read our campervan tank and pump guide for the next part of the build. You can also send your layout and measurements to NEVAN.