You are currently viewing Choosing and Storing a Campervan Grey Water Hose

Choosing and Storing a Campervan Grey Water Hose

Measure a campervan grey water hose from the drain outlet to where it needs to reach at a disposal point. The lowest part of the door trim or the angle of the outlet can shorten the usable reach. Choose a suitable hose and coupling you can handle without reaching awkwardly beneath the van.

Match the hose to the waste outlet

Start with the outlet model and the required connector and hose sizes. Check whether the fitting can be turned or removed with the adjacent step or skirt in position. A hose can look long enough when drawn straight and fall short once it needs to clear the sill. For a gravity system, check the required fall and avoid tight bends or low loops that trap water.

Plan a clean trip to the disposal point

Use the site’s designated grey water disposal point and follow staff instructions. The Camping and Caravanning Club’s water and waste guide explains the site and service options. Check that the hose is supported and unlikely to interfere with other people or vehicle movements. Keep its equipment apart from fresh-water filling equipment.

Give the used hose a separate home

Drain the hose where allowed and store it in a suitable dedicated container. Plan how to clean or dry it according to product instructions. Colour or label the storage so a second traveller can tell the fresh and waste fittings apart at a glance. Inspect couplings for wear before departure and make sure the outlet is shut or capped as specified.

FAQ

Can I leave the hose connected on a pitch?

Follow campsite rules and the vehicle system’s instructions. Secure the route and keep it clear of wheels and walking space.

Should I buy the longest hose I can carry?

Choose by actual reach and storage. Extra length can make gravity draining and cleaning more awkward.

Read our campervan waste tank guide for the next part of the build. You can also send your layout and measurements to NEVAN.