Campervan drawer runners need to suit the loaded drawer, how far it extends and how it is held shut when the vehicle moves. Read the full mounting diagram before choosing a pair. The same runner may have different ratings depending on its orientation and installation.
Measure the closing gap and the fully open drawer
Record the drawer box width, depth, face thickness and empty weight. Add the weight of your ordinary load. Include doors, hinges and handle positions, then check what happens at full extension in the aisle or through the rear doors. Check the listed side clearance, supported mounting materials and any need for specific fasteners.
Check travel retention and future access
Select a runner and retention arrangement suitable for the application. If a drawer has an ordinary soft-close mechanism, check separately how it is held in the closed travel position. Put fasteners and release levers where you can reach them. Test the finished drawer with its regular load, checking that it can be removed for servicing without dismantling the galley.
FAQ
How should I compare two load capacities?
Check how each manufacturer states the rating, including mounting orientation, length and whether the value applies to a pair.
Should the drawer open beyond the cabinet front?
Use full travel where it lets you reach the rear of the drawer. Check the full extension against the van doorway, adjacent seating and equipment.
Read our guide to campervan pull-out storage drawers for the next part of the build. You can also send your layout and measurements to NEVAN.