A campervan corner sink can leave a clear patch of worktop along the main aisle. The bowl also occupies a part of the cabinet where the door or shelf may already be awkward to reach. Draw the basin from above and make a cross-section showing the waste fitting, tap connection and underside access.
Try the worktop with the real tap movement
Lay the supplier’s cut-out template on a sheet matching the size of your worktop. Mark the taps, switch or mixer lever and see whether they clear the wall and window. Stand where you normally wash up and reach the far side of the bowl. Capture where a nearby wall join or narrow strip of board will need support.
Keep the waste route open below
Measure the fall to the waste container and the path around drawer runners or a corner cabinet post. Make the first joint serviceable without removing the top. Follow instructions for secure fitting and sealing, and test the installed plumbing for leaks and proper draining. Check that the lowest shelf still slides or lifts out with the pipework in place.
FAQ
Will a corner bowl leave enough room for meal preparation?
Put the plate and board you use on the full-size plan. Check the actual clear surface once the tap and drainer are included.
Can I turn the sink to point the tap another way?
Use a configuration permitted by the manufacturer and check the clips, tap mount, drainage and clearances before committing to the cut-out.
Read our guide to campervan kitchen worktops for the next part of the build. You can also send your layout and measurements to NEVAN.