You are currently viewing Diagnosing Draughts Around a Campervan Sliding Door

Diagnosing Draughts Around a Campervan Sliding Door

If you are looking for a campervan draft excluder, identify where the air is entering before adding foam or trim. A slider with a damaged seal, a door sitting out of alignment and a working ventilation opening need different responses. Start with an inspection of the door close and the area around the threshold.

Find the gap while the van is parked

Check the seal with good light for sections that are torn, flattened or detached. Look for a gap that changes as a handle or latch is operated. Check for signs of water, including staining or debris at the sill. Compare with the vehicle’s seal and drain drawings or ask a repairer to inspect the fit if the door is hard to close.

Preserve the intended openings and door movement

Keep the required ventilation and drain routes clear. In a conversion, check whether new floor trim, furniture or a removable cover is pressing on the original seal. Use replacement parts or additions suited to the exact model and protect the movement of the latch, sliding mechanism and exit. Check the result in ordinary weather and see whether the threshold remains dry.

FAQ

Can an extra strip make the door harder to close?

Yes. The extra thickness can change how the seal compresses. Check the original condition and use an approved door repair or fitting.

Could a cold spot come from the floor instead of the seal?

Compare when it occurs and check the finished threshold, lining and original door condition. Inspect each area with the vehicle parked.

Read our guide to insulating van doors around drains and latches for the next part of the build. You can also send your layout and measurements to NEVAN.