You are currently viewing Fiat Ducato Campervan Dimensions to Measure Before Ordering Furniture

Fiat Ducato Campervan Dimensions to Measure Before Ordering Furniture

Fiat Ducato campervan dimensions make sense once you say exactly where each measurement was taken. A wide loading area at floor level does not tell you how much room your shoulders will have on a transverse bed. Make a drawing of the finished space with the proposed lining, floor and furniture shown at their real thicknesses.

Mark three places to measure width

Measure between the wheel arches, between the walls at the height of the bed platform, and between them again at shoulder height above it. Give each pair of measurements a label. If the bed will sit near the rear, measure both ends of the proposed platform. The aperture and the rear pillar trim can also limit how a completed piece of furniture goes in. See the Fiat Professional dimensions reference for how manufacturer dimensions are presented.

Use a finished-floor reference

Mark the top of the proposed floor build-up on a temporary upright. Measure headroom from that line to the lowest item above the aisle, such as a roof rib, vent trim or light. Record useful floor length from the cab seats in their real travelling position to the inside of the closed rear doors. Measure the relevant door opening separately.

FAQ

Can I use one Ducato measurement drawing for every van?

Start with the version and year, then verify measurements on the actual vehicle. Floors, trim, existing fittings and earlier modifications can change the fit.

What should I send with a furniture enquiry?

Include a plan, the bed-height cross-section, clear photographs of the openings and the planned floor and lining thicknesses.

Read our Fiat Ducato campervan layout guide for the next part of the build. You can also send your layout and measurements to NEVAN.