A campervan bed lift system changes the height of a bed platform above a garage. Start by naming the two heights you need. One must let you load and secure your largest equipment. The other should leave suitable sleeping headroom and a way to reach the bed and exits.
Draw both positions with real loads
Trace your tallest bike or box under the lowest projected part of the raised platform. Allow for fixtures, bedding and access to the rail or controls. In the sleeping position, check the equipment underneath and the clearance to roof lights and cupboards above. Include a method of reaching the bed that does not close the intended exit route.
Ask about ratings and movement before selection
Discuss the platform and mattress weight, sleeping load, approved mounting and travel position with the supplier and installer. Find out what prevents movement in transit and what happens if the mechanism loses power. Leave the specified inspection space. Follow the manufacturer’s directions on operation and keep bodies and gear out of the moving zone.
FAQ
Can the lift travel while fully loaded with bedding?
Follow the equipment instructions for travel loads and locking. Check which parts of the load need separate restraint.
Should the lifting system share mounting points with garage straps?
Ask the designer to verify the load paths and any combined use. The lift and cargo restraints need mounting suitable for their respective purposes.
Read our guide to keeping a fixed-bed garage accessible for the next part of the build. You can also send your layout and measurements to NEVAN.