Wool insulation can be a practical choice for awkward cavities in a campervan, provided the product suits the application and stays where you put it. Compare actual thickness and the detail around door mechanisms before ordering a full pack. A small sample inside your own van reveals more than a photograph of a tidy flat wall.
Compare products using the same thickness
Start with the supplier's declared thermal data, intended applications and any information about fire performance, treatments and handling. The word wool can refer to different products and blends. Compare performance at the thickness you can actually fit. A deeper batt squeezed behind thin lining may perform differently from the same product installed at its declared thickness.
Make one test bay with the lining in place
Choose a section with a rib and a curved edge. Measure its usable depth in three places. Fit a sample in line with the product instructions and place a temporary piece of lining over it. Check whether the sample stays supported when the lining comes away. Look for a gap at the curve and a compressed patch at the rib. Record the finished distance from the steel to the room-facing surface.
Keep doors and maintenance points usable
Map the window and latch mechanisms, drain points and places where a future repair needs access. Do not pack those spaces just because they are visible. Plan how to inspect vulnerable areas and how moisture from normal use will be managed. Check with the insulation supplier before combining layers with different moisture properties. Label the locations of the fasteners that will remain behind furniture.
Frequently asked questions
Is it useful to fill every void with wool?
Only fill appropriate cavities. Doors, moving parts and drainage points can need clear space. Check the vehicle and product guidance first.
How can I estimate how much to order?
Measure the bays you intend to insulate and draw them to approximate scale. Use the product's stated pack coverage, and allow for the offcuts you can reuse in small bays.
For the next step, read our guide to curves and service access. Use your finished lining depth when preparing a furniture enquiry. Start your NEVAN layout enquiry.