You are currently viewing Campervan Kitchen Splashbacks for Small Galleys

Campervan Kitchen Splashbacks for Small Galleys

A campervan kitchen splashback takes the repeated drips that land behind the sink and keeps splashes out of the lining joint. In a narrow galley, even a small panel can make cleaning easier. Put the actual tap on the drawing first, because its lever and hose connections can determine how much room the panel has.

Decide where the panel starts and ends

Hold a sheet of card against the finished wall and mark the tap, window trim and underside of any overhead unit. Move the tap and wipe behind it with a cloth to test access. On a curved van wall, a flat panel may meet the worktop at one point and stand away at another. Develop a supported detail for that gap rather than expecting a thick bead to carry the panel.

Match the surface to its surroundings

Compare laminate, a suitable sheet product and metal by weight, ease of cleaning and the backing they require. Around cooking equipment, use the appliance maker’s instructions on clearances, surface suitability and heat protection. A material that works behind a sink may have different limits behind a hob. Ask the relevant supplier which sealants and adhesives are compatible with both the face and the backing.

Make the lower joint easy to reach

The line where the panel meets the counter should be visible when the sink is in use and accessible later. A removable end trim can help if the tap or window has to come out. After fitting, clean the joint with the instructions at hand and check where a little water collects during ordinary washing up.

FAQ

Should the splashback run the full worktop length?

Only where it earns its space. A shorter panel can cover the wet zone if the ends and lower joint are easy to clean.

Can I stick it over existing lining?

Check that the lining is sound, stable and suitable for the system, with clearance for the added thickness.

Read our guide to a campervan sink with a drainer for the next part of the build. You can also send your layout and measurements to NEVAN.