You are currently viewing Campervan Shower Wall Panels and Watertight Joints

Campervan Shower Wall Panels and Watertight Joints

Campervan shower wall panels are easy to wipe when the shower is finished. The harder part is getting the surface, corners, tray and fittings to work together as a waterproof assembly. Draw one section through the lowest corner before you buy the wall material.

Choose a system that suits the wall

Compare lightweight waterproof boards or sheet systems specified for the location. Ask the supplier what backing, bonding and sealing they require, and whether the products are suitable for the movement a vehicle sees. A panel designed for a flat wall will be difficult to seat on a tight van curve. A flatter framed face may cost a little internal width and give the sheet continuous support.

Follow the joints round the cubicle

Start at the tray and trace each vertical seam, the top edge and every pipe penetration. Pick the specified corner or sealing details before cutting panels. Keep lower junctions visible during installation, because it is easier to see whether the panel and tray meet consistently before a screen or doorway trim hides them. Set aside a panel route for future access to controls, hose joints and adjacent storage.

Check the finished assembly before boxing it in

Respect the supplier’s cure time. Use its recommended leak-test procedure and inspect any accessible panel behind the shower. If water collects at an edge, check the tray and seal detail early. Plan a ventilation and drying routine for the whole cubicle, including the door or folded screen.

FAQ

Is a waterproof sheet enough to make the shower watertight?

The sheet is only one part. The seams, fasteners, pipe penetrations and tray junction all need the compatible details of the assembly.

Should the side panels follow the van’s curved metal?

Only if the chosen system supports that curve. Mock up the tightest area and follow the material maker’s instructions on backing and support.

Read our guide to planning a folding shower for the next part of the build. You can also send your layout and measurements to NEVAN.