You are currently viewing Campervan Bonded Windows and How to Plan the Opening

Campervan Bonded Windows and How to Plan the Opening

Campervan bonded windows sit close to the outside panel and can give a conversion a tidy finish. Choose the glass and its position before building the inner window surround. A pane that matches the outside pressing may still put a blind cassette, cupboard or bed pillow in an awkward place inside.

Check the actual body panel and glass

Identify the model, body generation, side and position. Confirm fit with the supplier using the same details, and check that the glazing is approved for its intended application. Look at the glass against the body curve and find out whether it is fixed, opens or has a slider. A fixed pane supplies light, so make a separate ventilation plan for the space.

Draw the view and the finished inner frame

Tape a template at the proposed height and stand, sit and lie down as you would in the van. Mark the lining depth and the inside edge of any cupboard. Consider exterior visibility after dark and choose a cover with enough mounting space. Ask a qualified fitter to confirm where a body opening is permissible and how the proposed glass, edge treatment and adhesive system work together.

Agree how the vehicle will return to use

Ask the installer which curing and movement restrictions apply to the glass and bonding system. The Sika UK automotive glazing resource provides examples of manufacturer-specific documentation for these products. Keep the inside trim accessible through the appropriate inspection and leak test. Record the window model so a replacement can be sourced later.

FAQ

Can any bonded campervan window go in either side panel?

Check the side and opening position on the drawings. Panel curve, opening shape and installation details can differ.

Does tinted bonded glass provide night-time privacy?

Try it with an interior light on. If people outside can see in from a typical standing position, allow room for a fitted blind or cover.

Read our guide to window seals and mounting systems for the next part of the build. You can also send your layout and measurements to NEVAN.