You are currently viewing Campervan Bed Slats for Mattress Support and Airflow

Campervan Bed Slats for Mattress Support and Airflow

Campervan bed slats support the mattress and leave openings for air to move underneath it. The size and spacing depend on the mattress and bed frame. When the bed crosses a wide garage opening, work out the support before cutting a pile of identical timber strips.

Start with the mattress maker’s base requirements

Check the maximum permitted gap, the type of support and any requirements for a centre rail. A thin foam mattress can dip between widely spaced slats, and the same frame can behave differently with a thicker mattress. Measure the actual support width at both ends of the bed; van walls usually taper and a frame that looks rectangular on the sketch may need more than one slat length.

Keep the slat ends secure and accessible

Choose a properly designed support for the sleepers and the mattress, with any centre span and end fixings taken into account. Work out whether slats lift individually or as part of a removable panel. Retain them appropriately for travel and give any lift-up access a secure operating arrangement. A thin compatible contact strip can address a proven squeak once the load-bearing parts are sound.

Check underneath after a night in the van

Use normal bedding and leave the garage loaded as it would be on a trip. In the morning, feel underneath the mattress and check whether stored bedding or crates are pressed against the openings. If moisture is staying there, review ventilation in the living area and increase practical space around the underside. Lift and dry a damp mattress before setting off again.

FAQ

Can I use standard flat-pack bed slats?

Check the span, supports and mattress requirements, plus the retention needed in a moving vehicle. A domestic pack needs to suit all those conditions.

Do slats guarantee a dry mattress?

They give air a path beneath it. The van still needs ventilation and enough room for that air to circulate.

Read our campervan bed frame guide for the next part of the build. You can also send your layout and measurements to NEVAN.