A Toyota Proace camper conversion can keep the rear useful for weekday cargo if the camping furniture comes out in manageable modules. Set a weight you can comfortably handle, and test how the box passes through the door with a second person available if needed. A lightweight module still needs suitable retention in transit.
Establish what stays in the vehicle
Record the exact Proace body and any existing seats, rails and trim. Decide whether the bed and galley are separate units and whether you want to remove the floor or leave a low deck. Tape the module footprints onto the floor. Check the rear and side loading paths with the existing seats and door latches in their real positions.
Set up for one evening before building
Stow an empty box where each module would go and make the bed on the proposed platform. Try reaching the bedding and water from the side door. Decide which heavy items travel low and how the furniture and luggage will be restrained using suitable vehicle points. Confirm the fixing arrangement with a competent installer, especially if rails have another vehicle purpose.
FAQ
Can I fit a module intended for another medium van?
Ask the supplier to verify the dimensions and retention for your Proace generation and trim. Similar-looking panels do not establish a match.
Where should the modules live between trips?
Check storage size and lifting access at home. Outline the dry, level storage area before finalising a one-piece design.
Read our removable campervan furniture guide for the next part of the build. You can also send your layout and measurements to NEVAN.