You are currently viewing Fitting a Campervan Shower Tray Around a Wheel Arch

Fitting a Campervan Shower Tray Around a Wheel Arch

A campervan shower tray above or beside a wheel arch needs a three-dimensional sketch. The wheel tub can sit below the edge of the tray in one place and interfere with its underside elsewhere. Make a cardboard profile of the finished wheel-arch cover before choosing the tray.

Compare a contoured tray with a raised platform

A contoured tray that suits the body can preserve a lower step into the shower. A raised flat tray may give you more choice of sizes and space for the waste fitting. Mark the finished wall faces, doorway and usable standing area in both options. Move through the opening with the proposed step at full height and check the space above your head.

Follow the support and drainage requirements

Get the tray manufacturer’s drawing and identify where it needs continuous support or specific framing. Show the highest point of the wheel arch, the drain fitting, nearby vehicle equipment and the space you need to reach the joint. Have a suitable installer check any proposed body or floor work. Test drainage and watertight joins using the product instructions before you close the enclosure.

FAQ

Can I trim a standard shower tray around the wheel arch?

Only use modifications the tray manufacturer permits. A cut can alter how the tray is supported and sealed.

Will raising the tray solve every drain problem?

It can give the waste fitting more clearance. Check the route, fall, service access, step height and standing room together before committing.

Read our campervan shower tray sizing guide for the next part of the build. You can also send your layout and measurements to NEVAN.