You are currently viewing Will a Wheel Arch Water Tank Fit Your Campervan?

Will a Wheel Arch Water Tank Fit Your Campervan?

A campervan wheel arch water tank uses the awkward space above and around the arch moulding. It can save the middle of the garage for bikes or folding chairs. Measure the tank profile, brackets and fittings as one package because the nominal body dimensions rarely tell you how much cabinet space the installation will need.

Try a full-size cardboard profile

Use the manufacturer’s drawing to mark the inside cut-out, cap, hose connection and bottom outlet. Allow for the wheel arch cover, floor and wall lining. Check which side of the vehicle the tank fits and whether it can be manoeuvred in and out with the bench in place. A cap that faces up may need a service hatch in a seat deck.

Allow for a full tank in the loading plan

Water weighs about one kilogram per litre, before the tank and supports are counted. A 45-litre example therefore adds about 45 kg of water low on one side. Compare it with the battery, furniture and regular garage load, then use the vehicle handbook and a suitably loaded weight check to confirm the van stays within its limits. Follow the tank and vehicle guidance on the supports and required restraint.

Check the hose route and the cleaning opening

Bring the filler and drain paths onto the same drawing. Leave room for a hand to reach the inspection opening and for the service connections to come apart without cutting out furniture. If the tank shape creates a low pocket, ask the supplier where it drains from and how it should be cleaned or winterised.

FAQ

Do wheel arch tanks fit both sides of a van?

Some are handed. Confirm the model, profile, orientation and fitting locations against the specific vehicle and installation drawing.

Should I box in the tank for good?

Keep the specified fittings and inspection access reachable. Design any furniture panel around what you will need to service.

Read our guide to choosing and placing a campervan water tank for the next part of the build. You can also send your layout and measurements to NEVAN.