You are currently viewing Van Lashing Rails for a Campervan Garage

Van Lashing Rails for a Campervan Garage

Van lashing rails give a campervan garage attachment positions that can move as your load changes. Plan them alongside the bike, tool case or water container you need to secure. The tidy position on a drawing may be hard to reach once the garage is full and the bed is made.

Place the proposed loads on the floor plan

Mark the space each item needs and how it could move forwards, sideways or upwards on the road. Check whether the selected strap can take the intended route without crossing a sharp corner or rubbing against another item. Include the access needed to operate the strap from the rear doors. Keep heavy loads low where the conversion and vehicle allow.

Check the complete restraint system

Match the rail, compatible fittings, straps and vehicle anchorage. Have a competent installer confirm the fixing arrangement and the vehicle body’s suitability, following the vehicle and component instructions. The DVSA load securing guide explains how vehicle structure and restraint components work together. A rating on a removable ring alone cannot establish what the assembled installation can handle.

Leave space to clean and inspect the fittings

Try the final positions with your normal luggage in place. Check that dirt can be cleared from the rail and that the fittings and straps can be inspected without removing cabinetry. Secure any spare fittings so they do not move loose during travel. Follow the component instructions for wear, cleaning and replacement.

FAQ

Can a rail be fixed straight to a plywood floor finish?

Ask an installer to verify the designed load path and compatible fixings for the vehicle. A finished floor alone may provide insufficient anchorage.

Can I mix rings and rails from different systems?

Use components whose compatibility and ratings are confirmed by their suppliers. Parts that appear to fit can perform differently under load.

Read our campervan cargo net guide for the next part of the build. You can also send your layout and measurements to NEVAN.