You are currently viewing Campervan Roller Blinds and How to Measure for Them

Campervan Roller Blinds and How to Measure for Them

Campervan roller blinds save a separate place for loose window covers. The housing and lower bar still take up space, especially in a galley or above a fixed bed. Start by checking how the blind will meet your window trim and whether you can reach the catch from the position where you actually use it.

Measure the opening and the finished wall

Decide whether the blind sits inside the reveal or overlaps the lining. Record the top, middle and bottom width, then check the manufacturer’s stated cloth width and overall casing size. On a curved wall, lay a straight strip where the housing will mount. The side guides or fixings may need a flat backing surface, particularly if the trim tapers towards the roof.

Test window and furniture clearances

Cut a cardboard strip the depth of the cassette and hold it above the window. Try the window latch, any sliding pane and the nearest cupboard door. At a fixed bed, place the pillows in their usual position and check whether the lower bar is still reachable. Where a cooker sits nearby, follow the equipment instructions on heat clearance and choose the blind location accordingly.

Compare privacy, light and servicing

Test for side gaps after dark using a light inside and a normal view from outside. Guided edges can make blackout more effective. A separate insect mesh is useful if you often leave the window open. Check how the spring and lower rail can be cleaned or reached and how the blind is secured in its travel position.

FAQ

Is a roller blind the same as an insulated cover?

Check the product details. A compact shading blind may have little insulating value, while a fitted thermal cover can suit colder trips.

Can I mount a cassette directly to thin wall lining?

Use the mounting arrangement specified for its weight and use. Check for reinforcement, cables and existing trim fixings behind the lining.

Read our guide to choosing sliding windows for the next part of the build. You can also send your layout and measurements to NEVAN.